Locate Nepal Telecom Hotspots Via Android

Are You Using WIFI Hotspots for Internet Service by NT.If Yes then Here i have an App For You that is easy for locating NT Hotspots

NTC Provides You Easy Service for Browsing Internet via it`s Hotspot which is not available. If you want to Use these Hotspot Service make sure to find Hotspot by NT and Follow Some Steps Below

Goto Your Message Box Having GSM or CDMA NumberType " WIFI " At Message BoxSend It To  " 1416 "After That, Password Will Be Provided to You and You can Surf  NOTE: This Subscription  will take Rs.10 per Hour and will be valid for 24 Hrs.

If You are Searching For Location of NT Hotspot Then Download The Android App" NT Hotspot Locator " From Android Marked


There have Been Issues as You can See Comments and Reviews On Play Store.It Might Be Helpful To You.

Removing write-protection from Removal Drive

With your USB drive plugged in, launch a command prompt. Do this by searching for cmd.exe in the Start menu (or Start screen in Windows 8). In Windows XP, click Start then Run, and type cmd.exe in the box.
NOTE: you may need to run Cmd.exe with administrator privileges if you see an “access is denied” message.
To do that, right-click on the shortcut and choose Run as administrator. In Windows 8, simply choose Command prompt (admin).
Now, type the following, pressing Enter after each command:

 NOTE:Do IT At Your Own Risk

  • diskpart
  • list disk
  • select disk x (where x is the number of your USB flash drive – use the capacity to work out which one it is)
  • attributes disk clear readonly
  • clean
  • create partition primary
  • format fs=fat32  (you can swap fat32 for ntfs if you only need to use the drive with Windows computers)
  • exit
Image Preview On CMD

By Low Level Formatting

You can Also Try this method by Completely Formatting Your USB Pendrive and Again Partitioning and Reallocating the Storage Space to the Pendrive Similar to the Process when You Connect a Fresh HDD having unallocated space.Please Read Disclaimer below before try the below given procedure.
Disclaimer :
We are Not Responsible For Any Harm that Comes to Your USB Pendrive or SD Memory Card After trying the Given Procedure.This is Intended to be Used For Information Purposes Only.TRY AT YOUR OWN RISK
Note – Please Copy Your Data From Your Pendrive or Memory Card before formatting the Pendrive.
Steps to Follow :
  • Download the Software for Low Level Formatting – Download Link
  • Now Format Your USB Pendrive or SD Card Using the Above Software.
  • After Formating Open RUN Dialog box and Type diskmgmt.msc and Press Enter.
  • Here in the Disk Management Just Find Your Pendrive or SD Card and Reallocate the Space and Format it similar to HDD Partitioning Process.
  • That’s all and You are all done.
Alternatively : Download theApacer Formatting Utility and Unzip it and Run the Start.bat File while Your USB Pendrive or SD Card is plugged in.Wait for a few seconds till your Pendrive is formatted and after that Reconnect it and Enjoy Copying Files to Your Pendrive or Memory Card.


Popular posts from this blog

The Top E-commerce Sites in Nepal

Locate Nepal Telecom Hotspots Via Android

Google Doodle celebrates Nepal Republic Day 2015